Wersja Polska



The UFD M800C is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD (640 x 480 pixels) and a host of new features to meet challenging inspection requirements. It combines powerful flaw detection and measurement capabilities, extensive data storage, and the ability to transfer detailed inspection data to the PC via its high-speed USB port.

The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband filters to improve signal to noise in high gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize penetration on thick or highly attenuating materials.
The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components.

Technical Datasheet UFD M800C 

Range: 0 to 9999 mm in steel
Material Velocity: 1000 to 15 000 m/s
Sensitivity: 110 dB in selectable resolution 0.1, 1.0, 2.0, 6.0 dB
Amplifier Accuracy: +/-1 dB
Display Delay: -20 to 3400µs
Probe Delay/Zero Offset: 0 to 99.99µs
Reject (suppression): 0 to 80% full screen height
Damping: 68 Ω, 100 Ω, 150 Ω, 500 Ω
Pulser: Tunable Square Wave Pulser from 0.1µs to 0.5µs
Pulse Energy: 200V, 300V, 400V, 500V, 600V
Pulse Repetition: Frequency ranges from 10 Hz to 1000 Hz in 1 Hz increments
Test Modes: Pulse echo, dual element and thru-transmission
Display Modes: A-Scan, B-Scan
Rectification: Positive halfwave, negative halfwave, fullwave, RF
Gates: Two independent gates controllable over entire sweep range with visual and audible alarm
Flaw sizing: DAC (Distance Amplitude Correction), AVG (DGS), CSC (Curved Surface Correction), AWS D1.1 (Weld Rating)
Memory: Memory of 1000 channel files to store calibration set-ups.
Memory of 10000 wave files to store A-Scan patterns and instrument settings.
All files can be stored, recalled and cleared.
Video Recorder: More than 10 hours of screen scenes can be saved to the internal memory
Units: Millimeter or inch
Language: Polish, English
Interoperability with external devices: PC interoperability through the USB serial interface
Power Supply: AC Mains 100-240 VAC, 50-60 Hz, Internal rechargeable Li-ion battery 7.2V, 8800 mAh
Continuous operation time (battery): Approx. 10 h
Weight (with battery): 1.8 kg
Overall dimensions: 280 x 215 x 65 mm
Operating Temperature: -10° to 50°C
Storage Temperature: -30° to 50°C

Optional accessories

Ultrasonic probes:
We offer wide assortment of ultrasonic probes to enable a professional measurement.
If a standard probe cannot be used for your tests, you can order a custom-made probe from us.

Ultrasonic probes

Wzorzec W-3
International W-1 standard

W-1 standard
W-1 standard is used to control the measuring device parameters: gain, scaling, time base for longitudinal or transverse waves; it is also used to check whether the parameters configured were not changed during tests. W-1 standard enables controlling the reflection angle of skew probes, the energy of device-universal probe circuit, and also examining the universal probe resolution, universal and skew probe sensitivity setting, as well as approximate adjustment of a dead zone.

W-2 standard for welded joint tests

W-2 standard

The W-2 standard is used to graduate the time base for transverse wave and determining the energy of skewed probes

The W-3 stepped standard

W-3 standard
The W-3 standard is used for graduating the time base for longitudinal waves in order to test thickness of materials from 2 mm to 10 mm.